Nylon 66 Rod & Sheet

Nylon 66 is a versatile engineering plastic. It is hard and tough, with a high melting point and good wear resistance. It is light, has good chemical resistance and is a good electrical insulator. Nylon 66 will give long service as a wear part with little or no lubrication. It can easily be bonded, welded and machined. Applications include; cams, gears, bearings, bushes, wheels, rollers, pulleys and electrical insulators.
  • Nylon 66 Rod & Sheet

Technical Specification

Colour White/Cream Specific Gravity 1.14 g/cm³
Moisture Absorption in Air 2.8% Water Absorption 8% at Saturation
Tensile Strength at Yield 88 N/mm² Elongation at Break 150%
Modulus of Elasticity 3100 N/mm² Hardness (Rockwell - R) 115
Melting Point 255°C Thermal Conductivity 0.23 W/k-m
Maximum Operating Temp. 115°C (Long Term)/ 160°C (Short Term) Minimum Operating Temp. -30°C
Co-efficient of Linear Thermal Expansion 7 x 10^-5 K^-1 Flammability (UL-94) V2
Volume Resistivity 10^12/10^15 Ohm-cm Dielectric Strength 36/100 Kv/mm

Product Range

Rod Diameter  Length  Pack Qty.  Product Code Price (+VAT)
per Length
  Availability
10mm 1m 1 Length 109-1833 £1.74 In Stock
12mm 1m 1 Length 131-3769 £2.04 In Stock
20mm 1m 1 Length 109-2027 £6.62 In Stock
25mm 1m 1 Length 109-2124 £7.25 In Stock
30mm 1m 1 Length 109-2221 £10.62 In Stock
40mm 1m 1 Length 109-2415 £25.52 In Stock
45mm 1m 1 Length 109-2512 £28.35 In Stock
50mm 1m 1 Length 109-2609 £32.51 In Stock
56mm 1m 1 Length 125-9352 £34.49 In Stock
60mm 1m 1 Length 109-2803 £40.52 In Stock
65mm 1m 1 Length 109-2997 £47.66 In Stock
70mm 1m 1 Length 109-3094 £54.90 In Stock
75mm 1m 1 Length 109-3191 £65.10 In Stock
Sheet Thickness  Size ±10mm  Pack Qty.  Product Code Price (+VAT)
per Sheet
  Availability
8mm 305 x 610mm 1 Sheet 109-3288 £34.97 In Stock
16mm 305 x 610mm 1 Sheet 109-3482 £59.25 In Stock
20mm 305 x 610mm 1 Sheet 109-3579 £73.24 In Stock
25mm 305 x 610mm 1 Sheet 109-3676 £89.25 In Stock
30mm 305 x 610mm 1 Sheet 109-3773 £89.82 In Stock
50mm 305 x 610mm 1 Sheet 109-3967 £187.11 In Stock
Only supplied in pack quantities shown. Please note that the rod diameter, as supplied, will normally exceed the nominal size to allow for machining.